- +0086 13256678789
- sigmund.zh@dimeifurniture.com
The plywood chair is designed according to the outline of the human body. Therefore, sitting on this modern iconic design will feel extremely comfortable. It processes light and thin wood chips into a slightly curved shape, giving the hard material a very soft appearance. Interestingly, the seat is made of thin three-layer plywood glued together, which brings a layered effect after assembly. In our daily life, the bent plywood dining chair is common and loved by people.
Plywood (thickness 3.58mm), density board, cutting machine, cordless drill, workbench, F clamp, C clamp, A clamp, polyvinyl acetate (PVAC), screws, tape measure, pencil, paint, sandpaper, etc.
First through the lamination and bending of the plywood, the steps are mold testing, gluing, press molding, segmentation, perforation, flat sand, curved sand, hand sand, and spray paint. You can also use the solid bending method, put the material in the pot, cover the lid and heat it to get the expected shape. The pressing method using glue as the adhesive is bent into the arc desired by the designer to obtain the curve of the seat and the bending of the legs.
Related Products
